首页
登录 | 注册

CISCO-506E-配置实例-ylc

User Access Verification

Password:
Type help or '?' for a list of available commands.
PIX506E> en
Password:
Invalid password
Password: *****
PIX506E# conf t
PIX506E(config)# show run
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname PIX506E
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 222.89.136.114 255.255.255.252
ip address inside 192.168.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 222.89.136.113 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.10-192.168.0.200 inside
dhcpd dns 219.150.150.150 202.106.196.115
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
terminal width 80
Cryptochecksum:6b37d6f37dcaac4b2871b75cff036032
: end
PIX506E(config)#


相关文章

  • MLS配置 要配置路由器上的MLS,采取下列步骤: 1)  启用路由器上的MLS.使用mls ip rp命令启用Cisco交换机上的MLS: c4500(config)#mls rp ip c4500(config)# 2)  定义将要运行 ...
  • 最新的网络设备图书“四大金刚”全面到货热销中
          网络设备图书领域最具人气的"四大金刚",两大主流品牌的交换机和路由器完美配置技术白皮书升级版再度强势登场,他们是:<Cisco交换机配置与管理完全手册>(第二版).<H3C交换机配置与管理完 ...
  • 终身会员卡上线三重大优惠!
    今天是最值得庆贺的一个好日子,因为许多朋友热切期待的,我在51CTO学院上的终身会员卡终于正式上线了!! 终身会员卡地址:http://edu.51cto.com/member/id-9.html 视频课程主心:http://edu.51c ...
  • 本文主要介绍了如何在AIX6.1下快速安装db2数据库以及基本的环境变量的配置.数据库创建.卸载及安装结果的验证测试~ 1.系统需求     需要 64 位 AIX 内核     AIX 6.1 TL 2     注: POWER7? 系统 ...
  • cisco交换机vlan-trunk的配置详解及应用实例
    配置思路: 1.创建vlan sw1#vlan database        进入vlan数据库 sw1(vlan)#vlan 2 name jishu   创建名为:技术的vlan VLAN 40 modified:     Name: ...
  •     开始搞网络的时候学习的,都是cisco.所以cisco情结非常深,后来工作接触cisco的设备少之又少......     关于批量配置相同端口的配置 ###思科:      interface range g1/0/x to g1 ...

2020 unjeep.com webmaster#unjeep.com
12 q. 0.012 s.
京ICP备10005923号